Lexmark X204n Mode D'Emploi
Can send but not receive faxes
These are possible solutions. Try one or more of the following:
C
HECK
TO
SEE
IF
THE
PAPER
TRAY
IS
EMPTY
Load paper in the tray.
C
HECK
THE
RING
COUNT
DELAY
SETTINGS
The ring count delay sets the number of times the phone line rings before the printer answers. If you have extension
phones on the same line as the printer, or subscribe to the telephone company's Distinctive Ring service, then
keep the Ring Delay setting at 4.
phones on the same line as the printer, or subscribe to the telephone company's Distinctive Ring service, then
keep the Ring Delay setting at 4.
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
in the TCP/IP section.
2
Click Settings.
3
Click Fax Settings.
4
Click Analog Fax Setup.
5
In the Rings to Answer box, enter the number of times you want the phone to ring before answering.
6
Click Submit.
T
HE
TONER
MAY
BE
LOW
88 Cartridge low
appears when the toner is low.
Can receive but not send faxes
These are possible solutions. Try one or more of the following:
M
AKE
SURE
THE
PRINTER
IS
IN
F
AX
MODE
From the printer control panel, press the Fax button to put the printer in Fax mode.
M
AKE
SURE
THE
DOCUMENT
IS
LOADED
PROPERLY
Load the original document faceup, short edge first into the ADF or facedown on the scanner glass in the upper
left corner.
left corner.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
clippings) into the ADF. Place these items on the scanner glass.
M
AKE
SURE
THE
SHORTCUT
NUMBER
IS
SET
UP
PROPERLY
•
Check to make sure the shortcut number has been programmed for the number that you want to dial.
•
As an alternative, dial the telephone number manually.
Troubleshooting
148