Lorex LW2002BAC1 Guide D’Installation Rapide

Quick Start Guide

Digital Wireless Color 

Camera with Stand

Power Adaptor 

for camera

• Aim the Cameras to best optimize the

  viewing area: Select a location for the 

  camera that provides a clear view of the 

  area you want to monitor, which is free 

  from dust, and is not in line-of-sight to a 

  strong light source or direct sunlight.

• Avoid installing the cameras where there 

   are thick walls, obstructions, or 

   interference (i.e. transformers, microwave 

   ovens or other electrical equipment) 

   between the Cameras and the Receiver.

• Select a location for the camera that 

   has an ambient temperature between 

   14°F~113°F (-10°C~45°C)

• Before starting permanent installation, 

   have another person hold the camera 

   for you while you verify its performance 

   by observing the image on a monitor. 

This camera includes IR LEDs, which 

provide the camera with the ability to 

view images in low light conditions. It 

is important to use the provided power 

adaptor (and not the Battery Pack 

Adaptor) when using the camera for 

prolonged periods in low light condi-

tions, as the LEDs will drain the battery 

more quickly than regular daytime use.

Digital Wireless Color 

Camera with Stand

 Mark the position of the 

screw holes on the wall.

• Drill holes and insert 2 screws.

• Firmly attach the camera to the wall by 

   placing the stand over the installed

   screws and pushing the base 

   downwards to secure.

Position the Base holes over the

screws. Slide the base downwards.

The Camera 

can be placed on a flat surface, or wall 

mounted. The versatile stand allows for 

several different mounting options.

Desk/Counter Mount

Wall Mount

NOTE: AVOID INSTALLING IN 

A LOCATION WHICH REQUIRES 

THE WIRELESS SIGNAL TO PASS 

THROUGH CEMENT, CONCRETE 

AND METAL STRUCTURES. THIS 

WILL REDUCE THE 

TRANSMISSION RANGE.