Konica Minolta Z1 Manuel D’Utilisation
B
ASIC RECORDING
24
Focus lock prevents the AF system from focusing. This can be used with off-center subjects or when
a special focusing situation prevents the camera from focusing (p. 25).
a special focusing situation prevents the camera from focusing (p. 25).
Without lifting your finger from the shutter-release button, recom-
pose the subject within the image area. Press the shutter-
release button all the way down to take the picture.
pose the subject within the image area. Press the shutter-
release button all the way down to take the picture.
Focus lock
Place the subject within the focus frame. Press and hold the
shutter-release button partway down.
shutter-release button partway down.
• The focus signal indicates the focus is locked. The shutter
speed and aperture value change from white to black
indicating the exposure is locked.
indicating the exposure is locked.
• When the focus is set, an AF sensor is displayed on the live
image to indicate the point of focus.
Focus range
0.57m - ∞ (1.9ft - ∞)
All distances are measured from the CCD. See page 35
for the marco focus range.
for the marco focus range.
Approximate location of CCD plane
Wide-angle position
2.07m - ∞ (6.8ft - ∞)
Telephoto position