Konica Minolta Z1 Manuel D’Utilisation

50

The Progressive-Capture drive modes continuously record
images while holding down the shutter-release button. When
the shutter button is released, the images stored in the cam-
era’s buffer memory are saved. These drive modes are set in
section 1 of the recording menus.

Immediately after selecting the progressive option on the
menu, a selection screen is displayed to select between stan-
dard and UHS Progressive Capture. Use the left/right keys of
the controller to select the progressive mode. Press the cen-
tral button of the controller to set the drive mode displayed in
the bottom right corner of the screen. Pressing the menu but-
ton cancels the operation without changing the drive mode.

Compose the picture as described in the basic recording
operation section (p. 22). Press the shutter-release button
partway down (1) to lock the focus exposure for the series.

Press and hold the shutter-release button all the way down
(2) to begin taking pictures; focus is locked with the first
frame. When the shutter-release button is pressed and held,
the camera will begin recording.

Release the shutter (3) to save the images in the camera
memory. The maximum number of frames and the rate of
capture depends on the progressive drive mode selected.
See the notes section on the following page.