Bizfon 2000 Guide De Montage
Bizfon Manual I: Installation Guide
Requirements
Requirements
•
One 120/240 VAC power outlet in close proximity to the Bizfon.
•
One RJ45 Ethernet 10/100 broadband Internet connection.
•
At least one RJ11 telephone connection is recommended to connect the Bizfon to the
PSTN network (all Bizfon IP PBXs with FXO ports).
PSTN network (all Bizfon IP PBXs with FXO ports).
•
At least one off-the-shelf analog phone with an RJ11 telephone cable.
•
One CAT 5 Ethernet cable with an RJ45 connector to connect to the Bizfon LAN port.
apter installed.
•
5 or higher, or Netscape Navigator 4.7 or
are added according to the different connectivity requirements of the Bizfon IP
X types.
•
One PC with a 10/100 Mbps Ethernet card or ad
•
TCP/IP network protocol installed on each PC.
For optimal results, Internet Explorer 5.
higher are recommended.
higher are recommended.
Please Note:
All Bizfon IP PBXs are shipped with one RJ11 cable and one straight RJ45
CAT 5 cable. If the LAN connector of the Bizfon connects to a hub or switch, a crossover
cable may be required.
cable may be required.
ther cables
O
PB
PB
Bizfon2000 and Bizfon4000; (SW Version 4.1.x)
7