Hitachi 31dx11b Manuel Du Propriétaire

HOOK-UP CABLES AND CONNECTORS 

Most video/audio connections between components can be made with shielded video 
and audio cables that have phono connectors. For best performance, video cables 
should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores 
that sell audio/video products. Below are illustrations and names of common 
connectors. 
Before purchasing any cables, be sure of the output and input connector types required 
by the various components. Also make sure the cables are the correct length. 

  

 

 

This outdoor antenna cable must be connected to  

an antenna adaptor (300-Ohm to 75-Ohm). 

 

For connecting RF signals 

(antenna or cable 
       TV) 

to 

the 

antenna 

jack 

on 

the 

television. 

 

 

 

 

Used on all standard video and audio cables which   This connector is used on 
camcorders, VCRs, 
connect to inputs and outputs located on the    

and laser disc players with an S-

Video feature 
Television's front and rear jack panels.   

 

in place of the standard video 

cable to produce 
       a 

high-quality 

picture. 

• The S-Video connection is provided for high performance laser discs, VCRs, etc., that 
have this feature. Use this connection in place of the standard video connection if your 
device has this feature. 

• If your device has only one audio output, connect it to the left audio jack on the TV. 

• Refer to the operating guide of your other electronic equipment for additional