Hitachi l26d103 Mode D'Emploi

4

Press STOP to end playback.

The unit memorizes the stopped point, depending on the 

disc. “ ” appears on the screen. Press PLAY to resume 

playback (from the scene point).

If you press STOP again (“   ” appears on the screen) or 

unload the disc, the unit will clear the stopped point.

•

•

5

Press  

(EJECT).

Remove the disc and then press POWER.

The unit turns off.

When you eject the disc, you may hear mechanism noise, but 

it is not malfunction.

If a non-compatible disc is loaded, “Incorrect Disc”, “Region 

Code Error” or “Parental Error” will appear on the TV screen 

according to the type of loaded disc. If these appear, check your 

disc again (see pages 9 and 30).

Some discs may take a minute or so to start playback.

If an 8 cm disc is placed into the disc slot and picture playback 

or menu display does not begin automatically, press PLAY.

A “Prohibition” symbol “ ” may appear at the upper right of the 

screen. This symbol means either the feature you tried is not 

available on the disc, or the unit cannot access the feature at 

this time. This does not indicate a problem with the unit.

If you place a single-faced disc label backwards (i.e. the wrong 

way) “Reading” will appear in the display and then “Incorrect 

Disc” will be displayed.

Some playback operations of DVDs may be intentionally fixed 

by software producers. Since this unit plays DVDs according to 

the disc content recorded, some playback features may not be 

available. Also refer to the instructions supplied with the DVDs.

Press SEARCH   during normal playback.

Each press of SEARCH   will increase the speed of the search 

 (x 2), 

 (x 4), 

 (x 8), 

 

(x 15).

(CD:   (x 2), 

 (x 4), 

 (x 8), 

 (x 20))

To resume normal playback, press PLAY.

Press SEARCH 

 during normal playback.

Each press of SEARCH 

 will increase the speed of the search 

 (x 2), 

 (x 4), 

 (x 8), 

 (x 15).

(CD: 

 (x 2), 

 (x 4), 

 (x 8), 

 (x 20))

To resume normal playback, press PLAY.

Press PAUSE during normal playback to pause playback.

To resume normal playback, press PLAY.

Press PAUSE during still playback.

One frame is advanced each time you press PAUSE.

To resume normal playback, press PLAY.

Press SLOW   Reverse or SLOW   Forward during normal 

playback or still playback.

Each press of SLOW will change the speed of the slow x1/2, x1/4, 

x1/6, x1/7.

To resume normal playback, press PLAY.

To resume the still playback, press PAUSE.

Press SKIP 

 Forward or SKIP 

 Reverse during playback to 

locate a chapter that you want to watch.

Each time you press the button, a chapter or track is skipped.

•

•

•

•

•

•

•

•

•

•

•

•

The unit is capable of holding a still video image or On screen 

display image on your television screen indefinitely. If you leave 

the still video image or On screen display image displayed on 

your TV for an extended period of time, you risk permanent 

damage to your television screen.

There may be a slight delay between when you press the button 

and the function activating.

MP3/WMA/JPEG CD is the disc that is standardized by 

ISO9660, its file name must include 3-digit extension letters, 

“mp3”, “wma”, “jpg”.

The directory and file names of MP3/WMA/JPEG CD must 

correspond to ISO standardized files.

This unit can read 2000 files per disc. If one directory has more 

than 2000 files, it reads up to 2000 files, the remaining files will 

be omitted.

MP3/WMA CDs cannot be used for playback for the purpose of 

recording.

It may take more than one minute for this unit to read MP3/

WMA/JPEG files depending on its structure.

Music recorded by “Joliet Recording Specification” can be 

played back.

The music files recorded by “Hierarchical File System” (HFS) 

cannot be played.

The unit can play back baseline and progressive JPEG files.

The maximum number for display is 15 characters. Long file 

names will be condensed.

Available letters for display are the following: capital or 

lowercase letters A through Z, numbers 0 through 9, and _ 

(underscore).

Other letters than those above are replaced by a hyphen.

To play back MP3/WMA/JPEG CD in the recorded order,

Use MP3/WMA/JPEG software that records data alphabetically 

or numerically.

Name each file including a two-digit or three-digit number (e.g. 

“01” “02” or “001” “002”).

Refrain from making too many sub-folders.

Some MP3/WMA/JPEG CDs cannot be played back depending 

on the recording conditions.

The CD-R/RW that has no music data or non-MP3/WMA/JPEG 

files cannot be played back.

1

Load a MP3/WMA/JPEG CD or an Audio CD in the disc slot.

2

“Reading” will appear on the TV screen. Reading time will 

depend on the number of files on the disc.

3

A file browser screen will appear on the TV screen.

•

•

•

•

•

•

•

•

•

•

•

•

•

1.

2.

3.

•

•

52K07_eng.indd   24

52K07_eng.indd   24

4/8/09   3:41:24 PM

4/8/09   3:41:24 PM