Hitachi l26d103 Mode D'Emploi

Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas 

are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear 

when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.

To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.

The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture. Use caution when 

cleaning or wiping the plastic parts.

Black spots or horizontal streaks may appear, the picture may flutter or drift. Usually caused by 

interference from automobile ignition systems, neon lamps or AC powered tools and appliances 

such as drills or hair dryers.

Ghosts are caused by the television signal following two paths. One is the direct path and the other 

is reflected by tall buildings, hills or other large objects. Changing the direction or position of the 

antenna may improve the reception.

If the TV is located far from the TV station, in a fringe reception area where the signal is weak, small 

dots may appear in the picture.

If the signal is extremely weak, the installation of a larger external antenna may be necessary.

Caused by two-way radios, this type of interference produces moving ripples or diagonal streaks 

in the picture. Some cases may cause a loss of contrast in the picture. Changing the direction and 

position of the antenna or installing an RFI filter may improve the picture.

A slight picture size variation is normal when you adjust the CONTRAST or BRIGHTNESS settings.

52K07_eng.indd   35

52K07_eng.indd   35

4/8/09   3:41:35 PM

4/8/09   3:41:35 PM