Canon iPF6400 Manuel

Page de 966
Note
If the Tab Selection screen is not displayed, press the Menu button.
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press  or  to select Adjust Printer, and then press the OK button.
5
Press  or  to select Feed Priority, and then press the OK button.
6
Press  or  to select Adjust Length, and then press the OK button.
7
 
Press  or  to select AdjustmentPrint or Change Settings, and
then press the OK button.
When you select AdjustmentPrint, a test pattern is printed for you to
measure the scale and calculate the discrepancy. The scale bar prints
Millimeter in 50 mm increments and Inch in 1-inch increments.
Note
A test pattern is printed in black when you choose A:High or in magenta if you choose B:Standard/Draft.
To cancel printing the test pattern for adjustment, hold down the Stop button. When "Stop printing?" is displayed,
press  or  to select "Yes", and then press the OK button.
8
Press  or  to enter the amount of discrepancy, and then press the OK button.
If the scale is shorter than the actual size, use a positive setting value. If it is longer, use a negative value.
The feed amount can be adjusted in 0.02% increments.
Adjusting Color on the Trailing Edge of Sheets
Adjusting Color on the Trailing Edge of Sheets
If printed sheets are affected by banding in different colors by the trailing edge (about 20–30 mm (0.8–1.2 in) from the
edge), try adjusting the feed amount of the trailing edge of sheets.
Important
This adjustment is only possible when feeding paper from the Top Paper Feed Slot that can be set up with a margin on the
trailing edge of 3 mm (0.12 in). Paper that does not allow a margin of 3 mm on the trailing edge is automatically ejected, and
the adjustment is not available.
Note
We recommend using the type of paper you use most often for adjustment.
For banding in different colors over the entire printed area of sheets or rolls (not only at the trailing edge of sheets), try adjust-
ing the overall feed amount. 
Items to Prepare
Sheets One sheet of unused paper of at least A4/Letter size
Perform adjustment as follows.
1
Load the paper.
 
iPF6400
                                                                                                                                                                  
Adjusting Color on the Trailing Edge of Sheets
 
 
Adjustments for Better Print Quality
Adjusting the feed amount
743