Canon MF7460 Guide De Référence

4-59

You cannot erase multiple destinations at the same time.
Press the alphanumeric keys (e.g., [ABC]) to display the individual 
keys for each letter or number. You can select a letter or number 
to restrict the displayed range of entries. Press [All] to return to 
the full address list.
If the desired destination is not displayed, press [

▼] or [▲] to 

scroll to the desired destination.
You can restrict the type of destinations displayed in the results 
list by pressing the Type drop-down list.
You can select a destination and press [Details] to confirm the 
detailed information related to the selected destinations. Press 
[Done] to return to the previous screen.
If you select [All] in the Address Book drop-down list, the 
destinations stored in the one-touch buttons are displayed. 
However, you cannot erase these destinations. For instructions 
on erasing one-touch buttons, see “Erasing One-Touch Buttons,” 
on p. 4-59.

To cancel erasing, press [No].
The message <Erased.> appears for approximately two seconds on 
the touch panel display.

–
–

–

–

–

–

  Press [Address Book Settings] → [One-touch 

If a password has been set for the Address Book, enter the password 
using 

–

 (numeric keys), then press [OK] to enter the Address 

Book Settings menu. (See “Setting a Password for the Address Book,” 
on p. 8-16.)
The Register One-touch Button screen appears.

If the desired one-touch button is not displayed, press [

▼] or [▲] 

to scroll to the desired one-touch button.
You can also specify the one-touch button’s number by entering 
the three digit number of the desired one-touch button using 

–

 (numeric keys).

Make sure that you verify the settings first before you erase them.
One-touch buttons that already have destinations stored in them 
are displayed with a black square (

■) in the lower right corner of 

the key.
If you select a one-touch button that already has destinations 
stored in it, the destinations are displayed.
If you register multiple destinations as a group address in a one-
touch button, the number of destinations registered in the group 
address is displayed.

To cancel erasing, press [No].
The message <Erased.> appears for approximately two seconds on 
the touch panel display.

–

–

–
–

–

–