Canon F50 Guide De Référence
3-9
Paper Handling
3
4
Cut the Banner Paper along one of the
perforations to the length required.
perforations to the length required.
5
Remove the tray cover and the multi-
purpose tray.
purpose tray.
6
Place the Banner Paper behind the machine
on a flat surface. Then insert the first sheet
and press gently down on the sheet
on a flat surface. Then insert the first sheet
and press gently down on the sheet
➀.
Pinch the paper guide, then slide it snugly
against the left edge of the stack
against the left edge of the stack
➁.
• Press gently down on the sheet until paper feeding
starts.
• Make sure the sheets behind the machine are
aligned with the direction in which the paper is
fed.
fed.
The machine is now ready to print.
7
Set your PC to print on the Banner Paper.
• Allow the paper to flow over the edge of the table
as it exits the machine.
2
1