Canon i860 Manuel De Montage

USB Port

USB Cable

Parallel Port

Secure

Wire Clips

Parallel Cable

TURN THE PRINTER OFF.

Connect one end of the parallel cable to 
the computer, the other to the printer.

Pinch the paper guide and slide it to the left.  
Load a sheet of blank paper in the paper  
rest. Slide the guide toward the left edge  
of the paper.

1

2

3

Paper
Guide

Insert the ink tank into the correct slot.  
(Refer to the color guide on the print head holder.)

Press down until the ink tank clicks into place.

click

NOTE: The printer will perform a print  
head cleaning after the cover is closed.

Paper Rest

Paper Output Tray

TURN THE PRINTER OFF.

Connect one end of the USB cable 
to the computer, the other to the printer.

IMPORTANT: Be sure the printer is  
off before continuing, or the computer  
will attempt to install the printer  
driver before the printer is ready.

click

Slide the print head into the holder.  
The print head will rest at a slight angle.

Remove the print head from its package.

Remove the orange protective cap 
from the print head nozzles. 

NOTE: Do not touch the electrical contacts  
or the print head nozzles.

Lower the lock lever and press it down  
until it clicks into place.

Raise the lock lever on the printer.

Print Head nozzles

Electrical contacts

Tear at notch to open

Plug the power cord into the back of the  
printer and connect the other end to a  
power outlet.

Open the front cover. The print head holder
automatically moves to the center. Remove  
the protective tape.

Write down the serial number located to 
the right of the print head holder. You will  
need this later to register the product.

Shipping Tape

POWER

Lamp

POWER

Button

Serial number

 Protective tape

Press the POWER button. The printer  
will initialize.

Remove the shipping tape from the  
front and back of the printer. 

i 860 Series

Desktop Photo Printer

Carefully remove all items from the box.

Documentation  

and Software Kit

Photo Paper Tray

Peel back the orange tab and completely  
remove the plastic wrapper from the Cyan  
Ink Tank (BCI-6C). 

Twist off and discard the orange  
protective cap.

NOTE: To avoid spilling ink, never  
press on the sides of an ink tank.

Insert the remaining ink tanks into 
their assigned slots.

Close the front cover and extend the  
paper rest and paper output tray.

Protective cap

Ink Tanks

      BCI-6Y Yellow               BCI-6M Magenta

BCI-3eBK Black                                                          BCI-6C Cyan

Power Cord

i 860 Series Print Head

BCI-6BK Black

1

2

3

4

5

1

5

4

3

1

2

1

2

3

4

5

1

2