LXE vx3plus Guide De Référence
184
Summit Radio
VX3Plus Reference Guide
E-EQ-VX3PLUSRG-A
WEP
To connect using WEP, make sure the following profile options are used.
• Enter the SSID of the Access Point assigned to this profile
• Set EAP Type to None
• Set Encryption to Manual WEP
• Set Auth Type to Open
• Set EAP Type to None
• Set Encryption to Manual WEP
• Set Auth Type to Open
Figure 5-13 WEP Encryption
Click the WEP keys/PSKs button.
Figure 5-14 WEP Keys
Valid keys are 10 (for 40 bit encryption) or 26 (for 128 bit encryption) hexadecimal characters.
Enter the key(s) and click OK.
Enter the key(s) and click OK.
Once configured, click the Commit button. Ensure the correct Active Profile is selected on the
Main tab and warmboot. The SCU Main tab shows the device is associated after the radio
connects to the network.
Main tab and warmboot. The SCU Main tab shows the device is associated after the radio
connects to the network.