GE jx2127sh Manuel De Montage

Draw a line on the cutout floor at the center of
the cutout, and extend the line 

1

⁄

2

″ down the face

of the cabinet.

Fold or cut the front edge of the template, along
the front guide line. Place the template flush
along the front edge of the cutout floor, aligning
the center line of the template with the center line
of the cutout floor. Mark the centers of the two
screw holes with an awl or center punch for the
anti-tip bracket location as shown.

Remove the template and drill two holes for the
anti-tip bracket.

Install the anti-tip bracket onto the cutout floor
using two bronze round-head screws.

Cutout Floor

Screws

Anti-Tip Bracket

Slide the microwave oven part way into the cabinet
opening.

Plug in the microwave oven.

The bottom bracket must be flat to the cutout
floor to engage correctly with the anti-tip bracket
as shown. Carefully slide the microwave oven back,
engaging the anti-tip bracket. Make sure the
power cord is not mashed or cut as you slide the
microwave into place.

the microwave oven within the 

cutout opening.

Ensure the microwave oven is accurately centered.
Line up the center line on the cabinet with the
triangular hole on the front of the bottom duct.

Drill pilot holes through the positioning flange
and then install five bronze round-head screws 
at the front of the bottom duct as shown.

Anti-Tip Assembly

Bottom Duct

Bottom Bracket

Anti-Tip

Bracket

Cutout Opening

Screws

Positioning
Flange