Canon IP6600D Mode D'Emploi
66
The inner cover is open
Close the inner cover completely. Paper does not feed properly if the inner cover is
even slightly open.
even slightly open.
If the printed surface is still scratched
Follow the procedure below and set the Prevent paper abrasion
Follow the procedure below and set the Prevent paper abrasion
Prevent paper abrasion
Prevent paper abrasion
Prevent paper abrasion to ON
ON
ON
ON. This
procedure also applies to direct printing from your camera.
1. Press the Menu
Menu
Menu
Menu button.
2. Use the
buttons to select Maintenance/settings
Maintenance/settings
Maintenance/settings
Maintenance/settings and then press the OK
OK
OK
OK
button.
3. Use the
buttons to select Device Settings
Device Settings
Device Settings
Device Settings and then press the OK
OK
OK
OK button.
4. Use the
buttons to select Print settings
Print settings
Print settings
Print settings and then press the OK
OK
OK
OK button.
5. Use the
buttons to select Prevent paper abrasion
Prevent paper abrasion
Prevent paper abrasion
Prevent paper abrasion and then press the OK
OK
OK
OK
button.
6. Use the
buttons to ON
ON
ON
ON and then press the OK
OK
OK
OK button.
* After printing is completed, return the Prevent paper abrasion
Prevent paper abrasion
Prevent paper abrasion
Prevent paper abrasion to OFF
OFF
OFF
OFF.
Possible Cause
Try This
iP6600D_DPG_US.book Page 66 Friday, May 27, 2005 6:39 PM