Ricoh IS200e Mode D’Emploi
Configuring the Scanner Settings
62
3
RRRR
Press [Exit].
This returns to the System Settings
menu.
menu.
SSSS
Press [Exit].
This exits the Scanner Features
menu, and returns to the standby
screen that is displayed when you
turn the power on.
This exits the Scanner Features
menu, and returns to the standby
screen that is displayed when you
turn the power on.
Important
❒ Never turn off the power of this
machine before the standby
screen is displayed. Doing so
can discard all the settings you
have configured, and return this
machine to its factory default
status.
screen is displayed. Doing so
can discard all the settings you
have configured, and return this
machine to its factory default
status.
Note
❒ Instead of pressing [Exit], you
can press a number key to enter
another setting menu.
another setting menu.
TTTT
If you have changed the settings
of “7. Network Boot”, turn off the
power and then back on.
The changes to the above settings
are activated.
of “7. Network Boot”, turn off the
power and then back on.
The changes to the above settings
are activated.