Ricoh BP20 Mode D'Emploi

S

OLVING

 

PROBLEMS

6.7

The test page is not printed.

Turn off the printer, then turn it back on.

Set IP is unable to automatically 

detect printers.

1. Check LAN cable is connected to the printers.
   • Check LAN cable is connected to the printers 

yourself.

   • Make sure that there are the connected printers 

shown in network neighborhood. If not, check 

the communication status of the printers.

   • If IP address is assigned to the computers, try 

ping command. Make sure the computers and 

printers are on the same network segment.

2. If LAN is connected by routers, Set IP is unable 

    to detect the printers.

3. Check entry values of IP address, subnet 

    mask and default gateway. 

The printer does not print.

 

c

Check IP address  

 

d

Check Model name of the driver

 

e

Try add a port

 

f

Refer to the "Set IP"