Electrovoice 205-4t Brochure

5

To augment and extend the low frequency response of any full-range models, an attractive
and powerful subwoofer completes the EVID line.The 12.1 provides an easy installation by
incorporating dual voice coils to handle both channels of a stereo pair. In addition, the unit
can power up to four satellites with its four crossed-over audio outputs on the back panel.

Same as EVID 12.1 above but with integrated 300 watt single channel amplifier.

Features adjustable 12dB/octave crossover, full range and high pass line level XLR pass thru
outputs, and all mounting hardware.

The AB-34 and 64 series kits feature a 4 sided powder coated steel

mounting assembly allowing for 4 EVID speakers to be mounted in an array to cover 
a 360 degree pattern.The mount offers additional flexibility in your EVID system
designs.The AB-34 works with the EVID 3.2 series and can be used with a threaded
rod for suspension from the ceiling. The AB-64 is used with the EVID 4.2 or 
6.2 series speakers and can be used with a speaker stand tripod or hung from the
ceiling using a threaded rod as shown. All necessary accessories and parts needed for 
use are included.

The AB-32 and AB-62 series kits feature a 2 sided powder coated steel

mounting assembly allowing for 2 EVID speakers to be mounted in an array to cover a 180
degree pattern.The AB-32 works with the EVID 3.2 series and can be used with a threaded
rod for suspension from the ceiling.The speakers can then be positioned on the bracket to
cover a variety of patterns to best serve the installation requirements.The AB-62 allows the
EVID 4.2 or 6.2 series speakers to be used with a speaker stand tripod or hung from the
ceiling utilizing a threaded rod as shown. All necessary accessories and parts needed for use
are included.

The HS-3 horizontal tabletop stand allows the EVID 3.2 or 4.2 to sit on a table,

meter bridge, desk, bookshelf or other flat surface. Ideal for portable applications, the stands are
made of steel for strength and durability and include rubber feet to protect surfaces.
Sold in pairs.

The VS Series vertical tabletop stands are available for any EVID full range model.

The stands allow the EVID speakers to be easily used on a table, desk, bookshelf or other flat
surface in a vertical configuration. Ideal for portable applications, the stands are made of plastic
coated steel for strength and durability. Sold in pairs.

The TC-4 and TC-6 terminal covers protect the input connections on the EVID

speakers from the long-term effects of moisture.The covers are available for the EVID 4.2 and 6.2
series models.The covers easily attach to the rear input panel of the speaker and include a
weatherproof cable connector.

Paging Mics

Ceiling Speakers

EVID

™

Systems

System Examples

Pr

oAnnounce

™

Hor

ns and Drivers

Surface Mount Speakers

Amplifiers

40 Hz-140 Hz

175/175 watts

100 dB

8 ohms

122 dB

—

—

12” (300 mm)

—

—

Spring

MDF, Steel 
fastener reinforced

—

16.5” x 23” x 12”

412 x 584 x 305 mm

40 lb. (18.1 kg)