Electrovoice tg5 Brochure

- Compound Thermal Protection

- Auto Mains Input Voltage Select

- Mains Circuit Breaker Supervision

- Complete PC Control (CAN, Ethernet)

- State-of-the-art Real Time DSP (RCM26/28)

- Unique System Diagnostics and Supervision

- Compatible with all other IRIS-Net

Compatible Hardware

are designed for today’s most demand-

ing audio applications. They offer a unique combination of high output

power, sonic excellence, high efficiency, as well as state-of-the-art,

optional signal processing and system supervision via IRIS-Net software,

in a compact lightweight format. 

Tour Grade amplifiers have a microprocessor controlled operation man-

agement system that provides useful features such as compound ther-

mal management (preventing amps from switching off in excessive ther-

mal environment), automatic mains voltage detection and a circuit break-

er control that allows the TG-7 to operate on a 30A (120V) or 16A (230V)

circuit breaker with normal music signal. 

Tour Grade amplifiers use a grounded bridge 3-step class-H topology to

ensure the highest acoustic performance and reliability. The TG Series

also offers the power and transient response to drive subwoofers along

with the low distortion for critical HF signals. The high capacity switch-

mode power supply provides the headroom needed to ensure high

dynamic outputs and reliable operation on extreme low loads.

Optional IRIS-Net™ (Intelligent Remote & Integrated Supervision-

Network™) Modules available for the Tour Grade amplifiers open up a

whole world of state-of-the-art DSP, remote control, networking and

unique system supervision – down to an individual loudspeaker compo-

nent. IRIS-Net™ software is an expandable, open architecture application

that operates under Windows™ and supports Ethernet, CobraNet™,

CAN-Bus, USB, and RS-232 interfaces. 

There will be several modules available: RCM-26 (DSP, AES/EBU input,

GPIO, CANBus), RCM-28 (DSP, GPIO, COBRA-Net™), RCM-20 (no DSP,

CAN-Bus) to allow any combination of central control and supervision

with central or decentralized signal processing. Connection to a PC run-

ning IRIS-Net software can be achieved using a UCC-1 USB-CAN inter-

face and/or a N8000 digital matrix.