Haier hlp21e Manuel D’Utilisation

Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing 
time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing
When selecting "twice wash" program, first soak for about 20 minutes, pre-wash for about 8 minutes, then 
soak for about 5 minutes, then do washing, rinsing and spinning. The wash time in the list includes the pre-
wash time.
When selecting "quick" program,wash,rinse and spin are set automatically,no procedure select can be done 
further

5 Close the top lid

Three water levels available according to the laundries quantity: High; Medium; 
Low.

After the water inlet under set water level, if higher water level is needed, please 
first turn the knob to "Add water", then turn back to needed water level. The 
washing machine will fill water to the new water level.

After the water inlet as per the preset water level, in case additional water
quantity is required, please first set the button to the "Add water", push and hold 
it to perform automatic water inlet. When it reaches the suitable water level, you
can turn it to the needed water level.

Page 9

When the washing is finished, the three 
indicators of "wash" "rinse" "spin" are
all on. The power will be switched off
automatically about 10 minutes after 
the finishing of the washing

If you open the top lid, the machine
will stop working except for water
filling and spinning

It beeps to 
indicate the
finishing of
washing

3 Adjust the "water level selection" knob to select
   suitable water level

4 Press the "Start/Pause" button

6 Washing finished