Haier hwm10-01 Manuel D’Utilisation

Page de 11
Safety precautions
Do not damage the power cord, bend , extend, twist, bind or alter it by force. Do not 
press or nip it with weight. If the supply cord is damaged, it must be replaced by the 
manufacturer or its service agent or a similarly qualified person in order to avoid a 
hazard. Keep the pin of the power plug clean, if the power plug is polluted with 
dust, please wipe with dry cloth carefully. If  the power cord or the power plug is 
bad, to avoid risk it is required to have it replaced by  the technicians of  our
special shop or  the  after-sale service department.
The power cord plug should be 
convenient to be pluged in or pluged 
out with hand while the washing 
machine runs normally. Be sure to pull 
the plug out and close the water tap 
when the machine is idle, when
moving  the machine, or when cleaning
the machine. Do not use wet hand to 
insert or pull out the power plug.
Do not let the machine share one 
receptacle with other electric appliances.
 If the power plug is damaged, or the 
plugging into the receptacle is loose, 
do not use the plug any more.
Do not wash water-proof laundries like 
the raincoat, bike covers etc. 
Do not use water hotter  above  50 C .
Do not put the machine at damp place like 
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
Please insert the power cord into special
receptacle with rated voltage. Be sure to 
use single-phase three pins  receptacle. 
The earthing terminal of the receptacle 
must be earthed reliably. If possible, 
please  adopt electric leakage protector.