Haier hwm6000 Manuel D’Utilisation

Page de 18
Safety precautions
Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or
nip it with weight. If  the power cord or the power plug is bad, or the power plug becomes
flexible, to avoid risk it is required to have it replaced  by
the technicians of  our  special shop or  the  after-sale
service department. Keep the pin of the power plug 
clean, if the power plug is polluted with dust, please
wipe with dry cloth carefully.
The power cord plug should be convenient
to be pluged in or pluged out with hand 
while the washing machine runs normally.
Be sure to pull the plug out and close the 
water tap when the machine is idle, when
moving  the machine, or when cleaning
the machine. Do not use wet hand to insert
 or pull out the power plug.
In case the washing machine is installed 
on ground with carpet, do not block the
ventilation hole with carpet.
Do not let the machine share one receptacle with other 
electric appliances. If the power plug is damaged, or 
the plugging into the receptacle is loose, 
do not use the plug any more.
Do not wash water-proof laundries like 
the raincoat, bike covers etc. to avoid 
abnormal vibrations in spinning.
Do not use water hotter  above  50 C .
Do not put the machine at damp place like 
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
Please plug the plug on special receptacle
with rated voltage. Be sure to use single-
phase three  pins receptacle. Ensure the
earthing prong of the power receptacle is 
earthed reliably. Use leakage protector if 
possible.
soft items
The ventilation holes
at the bottom
2