Haier hwm6000 Manuel D’Utilisation

1.Do not take off the water absorption 
   cushion. Please check if the cushion
   is dropped or damaged before each
   usage. If it happens please contact
   our after-sale department immediately.
2.Put the nut of the water inlet hose on
    the valve jointer.
3.Fasten the nut. Swaying it gently to 
   confirm if it's suitable.

1.Close the water tap.
2.Press the locking lever. Push down the slider. Then
   pull off the water inlet hose. If the machine is used
   more than once every week, the jointer of the water 
   inlet hose can be kept on the tap to prevent 
   damaging the fixing screw.

1.Push down the slider. Insert the 
   water inlet hose into the jointer.

2.Hang the lock lever to the jointer. 
   Release the slider till a click
   sound is heard.

Locking lever

Slider

Water absorption cushion

Nut of the water inlet hose

Jointer of the water inlet valve

Slider

Jointer of the water 
inlet hose

Locking lever

Connection between the water inlet hose and the 

washing machine

Connection between the jointer of the water inlet

hose and the water inlet hose

Check the connection between the jointer of the 

water inlet hose and the water tap

Take down  the water inlet hose

1.Swaying the hose gently to confirm if it is fastened stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if
   the connection between the jointer 
   of the water inlet hose and the water
   tap, and the installation of the
   water inlet hose are firm, so as to 
   prevent dropping from improper 
   Installation position.

7