Haier rwt150aw Mode D'Emploi

Page de 56
10
RWT350AW
1
2
3
4
5
6
Temperature Wash / Rinse (1)
• To select inlet water temperature for wash and rinse. Selection here may vary 
per the cycle chosen. All selections are not avialable in all cycles.
 
Load Size (Water Level) (2)
• Load Size (Water levels) may be set before the wash or in pause 
mode. 
• During Soak, Wash or Rinse, press this button to manually replenish water.
Release for the water to stop. Function automatically is inactive when water
reaches the overflow protection level. These are 5 selections to choose from:
Super, Large, Medium, Small and Extra Small.
Cycle Select (3) 
There are 7 cycles to select from:
• Normal - Use this cycle for normally soiled cottons and mixed fabric loads. 
• Whites - Use this cycle for white and light colored clothing.  
• Colors - Use this cycle for lightly soiled, dark or highly dyed natural fabrics 
such as cotton that may be susceptible to to dye loss.
• Heavy - Use this cycle for heavily soiled durable garmets. Also this cycle 
could be used for towels, sports gear, childrens clothes, etc.
• Delicate - Use this cycle to wash lightly soiled garments and delicate clothes 
that need gentle washing.
• Quick - Use this cycle to wash small, lightly soiled loads that are needed in a 
hurry.
• Spin only - Use this cycle to remove excess water from clothes. For certain 
delicate and cotton clothes that you do not wish to put in the dryer, this is an 
ideal cycle.  
Start/Pause Button (4)
• Once the cycle is selected, temperature and load size choosen, press this button 
once to start the wash.
• While unit is working press it once to pause the cycle.
• If the unit is in pause mode press it once to resume wash.
• If start/pause button is not pressed in 5 minutes after cycle, temperature and 
load size is selected the washer will return to off status.
Process Status (5)
• This shows the current cycle status of the wash load.
Extra Rinse (6)
• Press button once to activate.
• Press again to deactivate.
• In this option the wash load will go through one extra rinse at the end of the 
cycle. 
• An Extra Rinse will automatically be added to the Whites Cycle.
English
English
 OPERATING INSTRUCTIONS