Haier rwt150aw Mode D'Emploi

Operating Procedure - RWT150AW

1. Press On/Off button to Power on the Machine

2. Selection of Cycles

• Turn the dial to the desired cycle.

3. Start/Pause

• If “Start/Pause” button isn’t pressed within 5 minutes after powering “On” the

unit will automatically switch off.

• The washer will also turn off immediately after completion of the wash process.

• Regardless of setting, pressing the off button all programs will stop.

• The washer has intelligent wash resumption (Cycle Reset). When power is

interrupted at the power source, the washer will resume running where it left off

when power is returned.

• Press this button when you want the machine to start.

• During operation, press this button to pause and press it again to resume

operation.

Note: Opening the top lid will stop the machine except during water filling

Normal Operating Sounds

The following sounds are normally heard during the operation of the washer:
• Tumbling sounds: This is normal as the heavy wet clothes in the washer are

continuously being tossed around.

• Air rushing noise: This happens when the washer tub spins at very high RPM.
• Wash and Rinse cycles going on and off will also make clicking sounds.

English