Haier ttl-700 Manuel D’Utilisation
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise, it may influence
your using the machine.
your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
7 Disposal after washing
Dismantle
Install
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
The filter screen of the water inlet valve is likely to
be blocked by foreign materials to influence the
water inlet. Please clean it with brush every two
months.
be blocked by foreign materials to influence the
water inlet. Please clean it with brush every two
months.
The lint filter must be used during washing.
It must be cleaned in time after each using
Lint filter:
1 pull upward to dismantle lint filter;
2 push downward to install lint filter;
3 please clean lint filter after wash.
It must be cleaned in time after each using
Lint filter:
1 pull upward to dismantle lint filter;
2 push downward to install lint filter;
3 please clean lint filter after wash.
Please rotates detergent box to control panel after
clean it.
clean it.
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time
(about 1 hour), then close the top lid.
(about 1 hour), then close the top lid.
4.Hang up the power cord and drain hose.
3.Be sure to pull off the power plug before maintenance.
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
Dismantle & Install
Clean
Using process
Using process
16