Haier xqb50-10 Manuel D’Utilisation

The largest  allowed slope of  the 
shank base of the machine is 2

.

The slanting or  rough  ground  will 
result  in  unstable  running or 
stoppage of the machine. Please 
adjust it with following methods:

Install the bottom plate

After  you  open  the package, 
please lean the washing 
machine gently down on soft 
items ( like the towel cloth, 
blanket, etc. ). Install  the
bottom plate to  the bottom of 
the  machine  with  the  eight
screws  by a cross screwdriver, 
then lift the machine up gently.
See to the figure:

Adjust the installation position

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.

1.Press downward to
   assmble.
2.Pull upward to detach.

1.To twist the adjustable foot, please 
   first lift up the side of the foot slightly, 
   loosen  the adjustable nut, and twist 
   the foot.
2.Fasten the nut after adjustment.

Loosen

Fasten

High

Low

adjustable nut

adjustable foot

"Hand scrub" wash:

The drum and pulsator rotate in opposite directions to form a washing 

water flow similar to hand scrubbing movement, and meanwhile the 

drum inner wall also take a share in washing, which obviously increase 

the washing intensity. 

Open-cover alarm function 

During washing cycle except the processes of water filling and draining, 

the washing machine will stop operation and automatically alarm if the 

top cover is opened. 

Special functions

Back

Front

Bottom plate

Screw

Soft items

Pull down

Put up

Install the lint filter