Haier xqj100-96 Manuel D’Utilisation
Outer drain hose
component
Drain hose hook
Drain hose joint
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
very important to your security and correct operating the machine.
Adjust the installation position
The largest allowed slope of the base of the machine is 2
. The slanting or rough
ground will result in unstable running or stoppage of the machine. Please adjust
it with following methods:
it with following methods:
Confirm it's horizontal:
Hang the lead line to confirm
if it is horizontal.
if it is horizontal.
Adjust the adjustable foot:
1.To twist the adjustable foot, please first lift up
the side of the foot slightly, and twist the foot.
2.Fasten the nut after adjustment.
the side of the foot slightly, and twist the foot.
2.Fasten the nut after adjustment.
High
Low
Adjustable foot
Install the drain hose
Usage of the drain hose
Drain hose clamp
First install the drain hose hook on the parts of
outer drain hose component.
Put the drain hose clamp on the outer drain hose,
insert the outer drain hose into the joint for it, and
then clutch tightly with drain hose clamp.
outer drain hose component.
Put the drain hose clamp on the outer drain hose,
insert the outer drain hose into the joint for it, and
then clutch tightly with drain hose clamp.
Hang the outer drain hose on the proper place
before washing( do not use it toppled down
on the ground).
Attend that the outlet of drain hose shall be higher
than the water level in washtub to avoid siphon
phenomenon.
before washing( do not use it toppled down
on the ground).
Attend that the outlet of drain hose shall be higher
than the water level in washtub to avoid siphon
phenomenon.