Haier tom1003 Manuel D’Utilisation

GENERAL MENU

LANGUAGE                           ENGLISH
BLUE SCREEN                                 ON
NOISE REDUCE                             OFF
INPUT SOURCE                                 TV
TXT LANGUAGE      P AN EUROPEAN
TXT EAST/WEST                          EAST
RESET                                       

1. Press 

MENU button until the following menu appears on the screen

13

You can adjust BLUE SCREEN , NOISE REDUCE, INPUT SOURCE and 
RESET to the levels you prefer.

2. Press 

P+/P- button to enter the general menu and to go up and down to 

select the desired option .

3.Press 

V+/V- button to adjust the selected option to your preference .

4. Repeat step 2 and step 3 until desired quality has been achieved .

Functions:

1. BLUE SCREEN : You can set it ON or OFF . If selected ON and there is no 
signal, the screen will be displayed in blue.

2.NOISE REDUCE : select OFF/LOW/MID/HIGH to reduce the noise of the 
picture and provide a clearer picture . (The effect is more and more noticable 
if you select in sequence as follows: OFF, LOW, MID, HIGH.)

3. INPUT SOURCE : Displays the current mode . Modes to select are :- PC-
RGB , AV , S-VIDEO TV  and SCART .

4. TXT LANGUAGE: To select the teletext languages.

5. TXT EAST/WEST: To select EAST or WEST type face. Normally set to 
WEST for UK

6. RESET : Press 

V+ to reset some settings to the factory default .