Nikon p5000 Mode D'Emploi

  

  79

This option is for use with the optional converter lenses listed below.  Note that
these accessories require a lens adapter ring (available separately); for more
information, see page 92 of this manual or the documentation provided with
the converter lens.

At settings other than None, a converter icon appears in the display.

e Converter

4

None
(default)

No modifications made to camera settings.  Use when no converter lens is
attached (be sure to remove lens adapter ring).

g

Use with WC-E67 wide-angle converter.
Camera zooms to widest angle; menu
shown at right is displayed.  Choose from:
• Distortion control on (default): Correct for

pin-cushion and barrel distortion.  Con-
tinuous set to Single  (

B 73); BSS and

bracketing can not be used (

B 75).

: Distortion control reduces the area visible in the final picture.

• Distortion control off: No distortion correction performed.
Zoom can be adjusted manually while Wide-angle converter is in effect;
note, however, that best results will be achieved with camera zoomed out.
Focal length at widest angle is 24mm (35-mm format equivalent, distor-
tion control off ).

f

Use with TC-E3ED telephoto converter.  Camera will zoom all the way in;
optical zoom is restricted to positions near maximum zoom.  Focal length
at maximum zoom is 378mm (35-mm format equivalent).  Focus mode
can not be adjusted.

A

Be sure to select the appropriate option when using a converter lens.  Select None when
no converter lens is attached.  At settings other than None, the built-in flash and AF-assist
illuminator turn off, Continuous flash (

B 73) can not be used.  Optional flash units can

still be used, although the converter may cast shadows in pictures taken with the SB-400,
SB-600, or SB-800 (

B 93; a wide panel is recommended when shooting with the SB-600 or

SB-800).  Check pictures in the monitor after shooting.