Nikon s10 Manuel D’Utilisation
70
T
he S
etup M
enu
AF Assist
If [Auto] is selected, AF-assist illumination will be used to assist the focus operation
when the subject is poorly lit (AF-assist illumination is unavailable in some modes;
when the subject is poorly lit (AF-assist illumination is unavailable in some modes;
23). Choose [Off ] to disable AF-assist illumination (note that the camera may be
unable to focus if lighting is poor).
Sound Settings
Adjust the following sound settings:
Option
Description
Button
sound
When [On] is selected, beep will sound once when operations are completed suc-
cessfully, three times when error is detected.
cessfully, three times when error is detected.
Shutter
sound
Choose volume of sound played when shutter is released (note that shutter sound
may not always play;
may not always play;
80). Choose [Off ] to disable shutter sound.
Start-up
sound
Choose volume of sound played when camera is turned on. If [Off ] is selected, no
sound will be played when camera is turned on. Startup sound will not play when
USB cable is connected (
sound will be played when camera is turned on. Startup sound will not play when
USB cable is connected (
47, 51).
Record Orientation
Photographs taken while [Auto] (the default setting) is selected contain informa-
tion on camera orientation, allowing them to be rotated automatically during play-
back or when viewed in PictureProject.
tion on camera orientation, allowing them to be rotated automatically during play-
back or when viewed in PictureProject.
Camera orientation is not recorded when [Off ] is selected.
Auto Off
Choose the time before the monitor turns off automatically to save power from
30 seconds, 1 minute (the default setting), 5 minutes, or 30 minutes. Regardless of
the option chosen, the monitor will remain on for 3 minutes when menus are dis-
played, and for 30 minutes when [Loop] is selected during Pictmotion or slide show
playback or the camera is powered by an optional EH-62A AC adapter kit. While the
monitor is off , the power-on lamp will blink. The camera will turn off automatically
if no operations are performed for another three minutes.
30 seconds, 1 minute (the default setting), 5 minutes, or 30 minutes. Regardless of
the option chosen, the monitor will remain on for 3 minutes when menus are dis-
played, and for 30 minutes when [Loop] is selected during Pictmotion or slide show
playback or the camera is powered by an optional EH-62A AC adapter kit. While the
monitor is off , the power-on lamp will blink. The camera will turn off automatically
if no operations are performed for another three minutes.