Nikon s10 Manuel D’Utilisation

70

T

he S

etup M

enu

If [Auto] is selected, AF-assist illumination will be used to assist the focus operation 
when the subject is poorly lit (AF-assist illumination is unavailable in some modes; 

 23).  Choose [Off  ] to disable AF-assist illumination (note that the camera may be 

unable to focus if lighting is poor).

Adjust the following sound settings:

When [On] is selected, beep will sound once when operations are completed suc-
cessfully, three times when error is detected.

Choose volume of sound played when shutter is released (note that shutter sound 
may not always play; 

 80).  Choose [Off  ] to disable shutter sound.

Choose volume of sound played when camera is turned on.  If [Off  ] is selected, no 
sound will be played when camera is turned on.  Startup sound will not play when 
USB cable is connected (

 47, 51).

Photographs taken while [Auto] (the default setting) is selected contain informa-
tion on camera orientation, allowing them to be rotated automatically during play-
back or when viewed in PictureProject.

Camera orientation is not recorded when [Off  ] is selected.

Choose the time before the monitor turns off   automatically to save power from 
30 seconds, 1 minute (the default setting), 5 minutes, or 30 minutes.  Regardless of 
the option chosen, the monitor will remain on for 3 minutes when menus are dis-
played, and for 30 minutes when [Loop] is selected during Pictmotion or slide show 
playback or the camera is powered by an optional EH-62A AC adapter kit.  While the 
monitor is off , the power-on lamp will blink.  The camera will turn off  automatically 
if no operations are performed for another three minutes.