Nikon S1200pj Manuel D’Utilisation

E

Refe

The following table lists the error messages and other warnings displayed in the 
monitor, as well as the solutions for dealing with them.

Display

Description

Solution

A

O (blinks)

Clock not set.

Set date and time.

N
Battery exhausted.

Battery exhausted.

Charge or replace the battery.

16, 18

P
Battery temperature 
high

Battery temperature is 
high.

Turn off camera, and allow 
battery to cool down before 
resuming use. After five 
seconds, the monitor will turn 
off and the power-on lamp 
will blink rapidly. After the 
lamps blink for three minutes, 
the camera will turn off 
automatically. Pressing the 
power switch also turns off 
the camera.

P
The camera will turn 
off to prevent 
overheating.

The camera has become 
hot.

The camera turns off 
automatically. Leave the 
camera off until it has cooled 
and then turn it on again.

N
No signal. The 
camera will turn off.

There is no signal from 
the connected device.

Input a signal from the 
connected device.

P
Close the projector 
cover

The projector cover is 
opened.

• Close the projector cover
• To resume projection, close 

the projector cover, turn 
the camera off and back on, 
and open the projector 
cover.

Q (

● blinks red)

Camera cannot focus.

• Refocus.
• Use focus lock.

28, 31
68

P
Please wait for the 
camera to finish 
recording.

Camera cannot perform 
other operations until 
recording is complete.

Wait until message clears 
from display automatically 
when recording is complete.

–

N
Memory card is 
write protected.

Write-protect switch is 
in “lock” position.

Slide write-protect switch to 
“write” position.

–