Nikon S6200 Mode D'Emploi

Features That Can Be Set Using the Multi Selector

Sh

ooting Feat

ures

You can set the flash mode to match the shooting conditions.

Press the multi selector H (m flash mode).

Use the multi selector to select the desired 
mode and press the k button.

• See “Available Flash Modes” (

A 57) for more 

information.

• If a setting is not applied by pressing the 

k button 

within a few seconds, the selection will be canceled.

• When U (auto) is applied, D is only displayed for 

a few seconds, regardless of Monitor settings 
settings (

Frame the subject and take a picture.

• The flash lamp indicates the status of the flash 

when you press the shutter-release button 
halfway.

- On: The flash will fire when you press the 

shutter-release button all the way down.

- Blinking: The flash is charging. The camera cannot take pictures.

- Off: The flash will not fire when a picture is taken.

• If the battery is low, the monitor will turn off in order to save power while the flash is 

charging.

Auto

7 6 0

7 6 0

2 9 m   0 s

2 9 m   0 s

C

When ISO sensitivity is set to Auto, the flash has a range of 0.5 to 4.6 m (1 ft 8 in. to 15 ft) at the 
maximum wide-angle zoom position and a range of 0.5 to 3.0 m (1 ft 8 in. to 9 ft 10 in.) at the 
maximum telephoto zoom position.