Nikon D2H Manuel D’Utilisation
242
Technical Notes—T
roubleshooting
Troubleshooting
Understanding Error Messages and Displays
This section lists the indicators and error messages that appear in the view-
fi nder, control panel, and monitor when there is a problem with the camera.
Con sult the list below before contacting your retailer or Nikon representa-
tive.
fi nder, control panel, and monitor when there is a problem with the camera.
Con sult the list below before contacting your retailer or Nikon representa-
tive.
Indicator
Problem
Control
panel
View-
fi nder
Solution
20
Lens aperture ring is not set to
minimum aperture.
minimum aperture.
(blinks)
Set ring to minimum aperture
(largest f/-number).
(largest f/-number).
27
Low battery.
Ready a fully-charged spare
bat tery.
bat tery.
27
Battery exhausted.
(blinks) (blinks)
Replace battery.
124
No lens attached, or non-
CPU lens attached without
specifying maximum aperture.
Aperture shown in stops from
maximum aperture.
CPU lens attached without
specifying maximum aperture.
Aperture shown in stops from
maximum aperture.
Aperture value will be dis-
played if maximum aperture
is specifi ed.
played if maximum aperture
is specifi ed.
32
Camera unable to focus using
autofocus.
autofocus.
(blinks)
Focus manually.
48
33
88
90
90
Subject too bright; photo will
be overexposed.
be overexposed.
• Choose a lower sensitivity
(ISO equivalency)
• Use optional ND fi lter
• In ex po sure mode:
• In ex po sure mode:
S Increase shutter speed
A Choose a smaller ap er ture
A Choose a smaller ap er ture
(larg er f/-number)
48
106
88
90
90
Subject too dark; photo will be
underexposed.
underexposed.
• Choose a higher sensitivity
(ISO equivalency)
• Use optional Speedlight
• In ex po sure mode:
• In ex po sure mode:
S Lower shutter speed
A Choose a larger ap er ture
A Choose a larger ap er ture
(smaller f/-number)
27
Battery can not be used.
(blinks) (blinks)
Contact Nikon-authorized ser-
vice representative.
vice representative.