Nikon D3x Mode D'Emploi
256
Q
Connecting to a Computer
This section describes how to connect the camera to a computer
using the supplied UC-E4 USB cable. Once the camera is
connected, Nikon Transfer (supplied) or optional Nikon software
such as Camera Control Pro 2 can be used to copy photographs to
the computer or control the camera remotely.
using the supplied UC-E4 USB cable. Once the camera is
connected, Nikon Transfer (supplied) or optional Nikon software
such as Camera Control Pro 2 can be used to copy photographs to
the computer or control the camera remotely.
D
Connecting Cables
Be sure the camera is off when connecting or disconnecting interface
cables. Do not use force or attempt to insert the connectors at an angle.
cables. Do not use force or attempt to insert the connectors at an angle.
A
Camera Control Pro 2
Camera Control Pro 2 (available separately; pg. 391) can be used to control
the camera from a computer. Before connecting the camera, set the
camera [USB] option (pg. 257) to [MTP/PTP]. When Camera Control Pro 2
is running, “c” will be displayed in the top control panel.
the camera from a computer. Before connecting the camera, set the
camera [USB] option (pg. 257) to [MTP/PTP]. When Camera Control Pro 2
is running, “c” will be displayed in the top control panel.