Nikon D70S Manuel D’Utilisation

This option is used to lock the mirror in the up 
position to allow inspection or cleaning of the 
low-pass fi lter that protects the CCD image sen-
sor.  See “Technical Notes: Caring for the Cam-
era” (

  194).  Highlight Mirror lock-up in the 

setup menu (

 155) and press the multi selector 

to the right.  Press the multi selector up or down 
to highlight an option, then press to the right to 
make a selection.

Mirror functions normally.

When shutter is released, mirror is locked in up position and blinking 
“– – – –   – – ” is displayed in control panel.  Mirror will return to down 
position when camera is turned off.  To ensure power is available to lower 
mirror, Nikon recommends using this option only when camera is powered 
by EH-5 AC adapter.

Before connecting the camera to a video device 
such as a  television or  VCR (

  170), choose a 

video mode setting that matches the video stan-
dard used in the device.  Highlight Video mode 
in the setup menu (

  155) and press the multi 

selector to the right.  Press the multi selector up 
or down to highlight an option, then press to the 
right to make a selection.

NTSC Use when connecting camera to NTSC devices.

Use when connecting camera to PAL devices.  Note that number of pixels in 
output is selectively reduced, causing drop in resolution.

The default video standard varies with the country or region of purchase.