Nikon D70S Manuel D’Utilisation

To  obtain the desired results with certain subject compositions, it may be 
nec es sary to use ex po sure compensation to alter exposure from the val ue 
sug gest ed by the cam era.  As a rule of thumb, positive compensation may 
be needed when the main sub ject is dark er than the background, negative 
val ues when the main sub ject is bright er than the background.

Exposure compensation is available in modes P, S, and A (in mode M, only the 
exposure information in the electronic analog exposure display is affected; 
shutter speed and aperture do not change).

1

 Pressing the 

  button, rotate the main 

com mand dial and confi rm  ex po sure com-
 pen sa tion in the control panel or the elec-
tronic analog exposure display (the 0 in the 
electronic analog exposure display will fl ash).  
Ex po sure com pen sa tion can be set to val ues 
be tween –5 

EV (un 

der ex po sure) and +5 

EV 

(over ex po sure) in in cre ments of 

1

/

3

 EV.

The cur rent val ue for ex po sure com pen sa tion 
can be con fi rmed by press ing the 

 but ton.  

The current value is shown in the control panel 
with a 

 icon; in the viewfi nder, positive val-

ues are shown by a   icon, negative values by 
a   icon.

2

 Frame the pho to graph, fo cus, and shoot.

Normal ex po sure can be restored by set ting ex po sure compensation to ±0 or 
per form ing a two button reset (

 111).  Ex po sure com pen sa tion is not reset 

when the camera is turned off.

Use this option to set the increments for exposure com pen sa tion to ½ EV.

If desired, exposure compensation can be set without pressing the 

 button.

+2.0 EV

–0.3 EV

±0 EV  (

 button pressed)