Nikon D80 Manuel D’Utilisation

The camera can be connected to a computer using the supplied UC-E4 USB cable.  The sup-
plied PictureProject software can then be used to copy photographs to the computer, where 
they can be organized, retouched, and printed.

Install PictureProject or any other software you may need after fi rst reading the manuals and 
reviewing the system requirements.   To ensure that data transfer is not interrupted, be sure 
the camera battery is fully charged.  If in doubt, charge the battery before connecting the 
camera or use an EH-5 AC adapter (available separately).

Before connecting the camera, select the USB item in the camera 
setup menu and choose a USB option as described below.

Windows XP Home Edition

Windows XP Professional

Choose PTP or Mass Storage

Mac OS X

Windows 2000 Professional

Choose Mass Storage 

*

* Do 

NOT

 select PTP.  If PTP is selected when the camera is connected, the 

Windows hardware wizard will be displayed.  Click Cancel to exit the wiz-
ard, and then disconnect the camera and select Mass Storage.

  Turn the computer on and wait for it to start up.

  Turn the camera off .

  Connect the supplied UC-E4 USB cable as shown.  Do not use force or attempt to insert 

the connectors at an angle.  Connect the camera directly to the computer; do not con-
nect the cable via a USB hub or keyboard. 

USB connector