Nikon D700 Mode D'Emploi
213
t
Using a GPS Unit
Optional Garmin GPS units that conform to version 2.01 or 3.01 of
the National Marine Electronics Association NMEA0183 data
format can be connected to the camera’s ten-pin remote terminal
using an MC-35 GPS adapter cord (available separately; pg. 389),
allowing information on the camera’s current position to be
recorded when photographs are taken. Operation has been
confirmed with Garmin eTrex and Garmin geko series devices
equipped with a PC interface cable connector. These devices
connect to the MC-35 using a cable with a D-sub 9-pin connector
provided by the manufacturer of the GPS device. See the MC-35
instruction manual for details. Before turning the camera on, set
the GPS device to NMEA mode (4800 baud).
the National Marine Electronics Association NMEA0183 data
format can be connected to the camera’s ten-pin remote terminal
using an MC-35 GPS adapter cord (available separately; pg. 389),
allowing information on the camera’s current position to be
recorded when photographs are taken. Operation has been
confirmed with Garmin eTrex and Garmin geko series devices
equipped with a PC interface cable connector. These devices
connect to the MC-35 using a cable with a D-sub 9-pin connector
provided by the manufacturer of the GPS device. See the MC-35
instruction manual for details. Before turning the camera on, set
the GPS device to NMEA mode (4800 baud).
MC-35