Frigidaire fgb504ch Mode D'Emploi

7

The oven is vented through the bottom grille of the upper control panel.   When
the oven is on, warm air is released through the vent. This venting is necessary for
proper burner operation in the oven and good baking results. DO NOT block the
vent. Doing so may cause baking failures, fire or damage to the wall oven.

ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO  OPERATING
THE OVEN). Always use oven mitts when using the oven.

Some models have 2 flat racks.  Other models have one flat rack and one offset rack.
The rungs on the offset rack are slightly raised from the edges of the rack. This raised
part of the rack is designed to allow easy and safe removal of foods from the lower
racks of the oven and prevent hands from contacting the hot oven door. Always use
the offset rack in the lower position.

To remove an oven rack, pull the rack
forward until it stops. Lift up front of
rack and slide out. To replace an oven
rack, fit the rack onto the guides on the
oven walls. Tilt the front of the rack
upward and slide the rack back into
place.

To bake on one rack, place the rack
on position 3. To bake on two racks,
place the racks  on positions 1 and 4.