Frigidaire plgf659eca Manuel Du Propriétaire

Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the
various functions of the oven as described below. Note: The  graphics on your timer may not look exactly like the one
shown. This doesn't change the way it operates.

Note: The oven function will not work if the time of day clock is not set.

318200176 (0510) Rev. A

Bake normally, Time Bake, Delay Start (delayed bake), Broil, Clean and Speed Clean.

Note: Push buttons or pads may be shaped differently.

When choosing a function, a beep will be heard each time a pad is pushed.  If desired, the controls can be programmed for silent
operation.
To tell if your oven is set for normal or silent operation push and hold START TIME pad for 7 seconds. "- -" or "SP" appears in
the display. Within 5 seconds, press the UP or DOWN ARROW pad to switch between normal sound operation and silent
operation mode. The display will show either "- -" or "SP". Wait 5 seconds to return to normal operating mode.
Note: If "SP" appears, the control will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation
mode.

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the
factory. The oven can be programmed to bake for any temperature from 170°F to 550°F
(77°C to 288°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be
in a Bake or Clean mode):
1.

Press and hold BROIL pad for 7 seconds until °F or °C appears in the display.

2.

Press the UP or DOWN ARROW pad to change °F to °C or °C to °F.

3.

Wait 5 seconds to accept the changes or press CLEAR/OFF pad to accept the
changes.

Bake Pad Used to enter
the normal baking mode
temperature.

Broil Pad- Used to
select the variable broil
function.

Clean Pad Used
to select the self-
cleaning cycle.

Clear Pad- Used to
clear any function
previously entered
except the time of
day and minute
timer. Push Clear
pad to stop cooking.

Up and Down arrow pads- Used along
with the function pads to select oven
temperature, cooking time, start time
(when programming an automatic start
time), time of day, clean time and minute
timer.

Clock Pad-
Used to set the
time of day.

Feature indicator
lights- These
lights show which
feature is in use.

Bake Time Pad-
Used to enter
the length of the
baking time.

Start Time Pad- Used to set the
desired start time for baking. Can
be used with BAKE TIME to program
a delayed bake cycle.

Timer Pad- Used
to set or cancel
the minute timer.
The minute timer
does not start or
stop cooking.

Oven, Preheat & Lock lights- The "oven" light indicates that the
oven is functioning. The "Preheat" light will glow when the oven
is first set to operate, or if the desired temperature is reset
higher than the actual oven temperature. The "Door Locked"
light will flash until the door locks when the self-clean cycle is in
use. It glows constantly after the door locks (some models).

Oven Interior Light Pad-
Used to turn oven interior
light ON and OFF.

Speed Clean Pad-
Used to select the
speed clean cycle
(some models).

Printed in United States

Si desea obtener una copia en
español de este Manual del
Usuario, sírvase escribir a la
dirección que se incluye a
continuación. Solicite la P/N
318200176E.

Spanish Owner's Guides
Frigidaire Company
P. O. Box 9061
Dublin, Ohio  43017-0961