Frigidaire frs24wsg Mode D'Emploi

8

4. You must replace existing large O-ring on filter housing.  First remove old ring and

discard.  (You may need to use a toothpick to get under ring.  NOTE:  Use caution
so that groove that holds ring is not damaged!)  Carefully remove new O-
ring from sealed bag.  Gently roll O-ring into place, into containment groove
above threads.

5. Remove packaging from filter cartridge.
6. Place filter cartridge in cup.  The end with the small o-ring should be up, out of

the cup.

7. Screw cup, with filter, back onto housing.  DO NOT USE WRENCH TO REINSTALL

CUP.  Filter cartridge will self-align as cup is tightened.  Be sure cup is completely
tightened with PureSource™   Logo facing outward.  DO NOT TIGHTEN PAST STOP.

8. Set ice maker lever to the ON (down) position.
9. Check for leaks.  Open refrigerator door.  Wipe any water drops from filter cup.

Run a glass of water.  If there is a leak, unscrew filter cup, and reinsert filter
cartridge.  Check placement of large O-ring (see directions following).  Reinstall
filter cup.

Remember to keep your wrench handy!

10. To condition filter system and purge air from water line, run several glasses

   of water through water dispenser.  This will also assure the purest water
   possible is stored in water tank.

Threads

Filter Cup

Filter Housing

Large O-ring

Small O-ring

Filter Cartridge