Hamilton Beach 72700 Mode D'Emploi

1. Read “Chopping Tips.”
2. Make sure chopper is unplugged.

Lock bowl onto base by aligning
bowl handle on right side of the
base. Turn clockwise until bowl
locks into place with handle toward
front. (See Illustration A.)

3. Place blade in bowl over center

shaft. Turn until blade slips down to
bottom of bowl. Blade is sharp;
handle carefully.

4. Place food in bowl.
5. Place cover on bowl and rotate

clockwise until interlock tab locks
into tower. (See Illustration B.)

6. Plug into electrical outlet.
7. To turn unit on, press and hold the

Pulse button for continuous 
operation. To Pulse, press and 
release the Pulse button. 

8. Remove cover. Unlock bowl by 

turning counterclockwise. 
Remove bowl from base. 
Carefully remove blade. Blade is sharp; handle 
carefully.

9. Unplug unit from outlet when not in use.

IF CHOPPER DOES NOT START : Review the steps in “How
to Use” to make sure the bowl and cover are both in the
locked positions.

The base of the food chopper is 
recessed to provide cord storage. 
Remove bowl and spatula from base.
Turn the base upside down and wind 
the cord as shown.

For easy preparation and cleanup, the
spatula stores on the back of bowl on 
the base of the food chopper.

(on selected models)

For improved chopping performance 
and for chopping small quantities, place
the Bowl Size Adjuster on top of food
before processing.

840130400 Ev01.qxd  1/12/05  10:51 AM  Page 4