Hamilton Beach D60012 Mode D'Emploi

1. Decanters (2)

2. Water Reservoir Cover

3. ON/OFF Switches

4. Power Indicator Light

5. Brew Basket

6. Warming Plates

(Upper and Lower)

1. Carefully unpack the coffee 

brewer

.

2. Wipe the coffee 

brewer

with a clean, damp cloth and dry with

a towel.

3. Remove the brew basket and wash in warm, soapy water. Do

NOT use harsh or abrasive cleaners. Rinse thoroughly.

4. Make sure the warmer switches are in the OFF position.
5. Plug the cord into a properly grounded outlet.
6. Place an empty decanter on the warmer below the brew 

basket.

7. Lift the reservoir cover and pour one decanter of cold tap

water through the pour-in screen into the reservoir. 
Never pour hot water into the reservoir.

8. Set the lower warmer/brew switch to the ON position to start

the brew cycle. The initial cycle will be several ounces short
because a small amount of water is retained in the system.

It is recommended that you repeat steps 6–8 two or three times
to thoroughly flush out the internal parts of the brewer before
making coffee.
The coffee 

brewer

is now ready to use and will yield full pots on

subsequent cycles.

840109800 Ev01.qxd  5/1/03  4:14 PM  Page 4