Arturia cs-80v Manuel D’Utilisation
ARTURIA – CS-80V – USER’S MANUAL
44
the fader is positioned, the higher the sine frequency. The generated harmonics will then
move away from harmonics of the treated sound.
move away from harmonics of the treated sound.
Three other faders modulate this effect. These set an envelope applied to the frequency
of the sine. «ATTK» gives the time taken for the sine to go from the initial frequency set
by «SPEED», to the frequency set by «DEPTH», while «DECAY» sets the time for the
by «SPEED», to the frequency set by «DEPTH», while «DECAY» sets the time for the
return to the initial frequency.
5.7
CHORUS
/
TREMOLO
Chorus/tremolo is an effect that allows a variety of effects, from simulation of an
ensemble to that of a rotary speaker. It is activated with the «CHOR» switch.
ensemble to that of a rotary speaker. It is activated with the «CHOR» switch.
Setting chorus/tremolo
The «TREM» switch takes us from chorus mode to tremolo mode. While the rotary
«SPEED» and «DEPTH» knobs respectively set the speed of rotation and depth of the
effect
«SPEED» and «DEPTH» knobs respectively set the speed of rotation and depth of the
effect
5.8 S
TEREO DELAY
Delay is an effect that simulates an echo. It is activated with the «DEL» switch.
Setting Delay
The rotary «SPEED», «DEPTH» and «MIX» knobs set the time between each echo, the
echo decay time and finally the output level for the effect.
The «SYNC» button is used to obtain echo times as a multiple or sub-multiple of the host
The «SYNC» button is used to obtain echo times as a multiple or sub-multiple of the host
application tempo. You choose the multiple or sub-multiple with the «SPEED» knob.