Logic Controls kb3000 Manuel D’Utilisation
5
FUNCTIONAL TEST
For testing purposes, your KB3000 keypad was pre-programmed with the
template shown at the right. The following simple steps will verify that the
KB3000 is in good working condition:
template shown at the right. The following simple steps will verify that the
KB3000 is in good working condition:
1.
Follow the Hardware Connections procedure described earlier in
this manual to connect the KB3000 to your computer.
this manual to connect the KB3000 to your computer.
2.
Turn on your computer.
3.
Press the upper left corner key of the keypad (intersection of
Row 1 and Column A).
Row 1 and Column A).
4.
The keypad is working correctly when the words “LOGIC
CONTROLS PROGRAMMABLE KEYPAD, MODEL KB3000”
appears on the monitor.
CONTROLS PROGRAMMABLE KEYPAD, MODEL KB3000”
appears on the monitor.
NOTE: To verify if a KB3001 is working it will be necessary to use
a communications program. Set the protocol to 9600
baud, no parity, and 8 data bits. Repeat steps 3 and 4
above to verify KB3001 is working correctly.
baud, no parity, and 8 data bits. Repeat steps 3 and 4
above to verify KB3001 is working correctly.