Devolo adsl modem Mode D'Emploi

Page de 41
Router configuration  
|
|
 devolo  MicroLink  ADSL  Modem  Router 
|
30
EN
3.3.7
Advanced
These functions are advanced functions which have been preset for optimal 
use. Normally, it is not necessary to modify these settings.
Virtual Server
You can use 'Virtual Server' to activate (via IP address) a certain service (spe-
cified by port number) for specific local computers for direct access from the 
Internet (e.g. for web, FTP or e-mail servers). If you want to use this option, 
dynamic IP address assignment must be disabled on the particular computer, 
and a static IP address assigned. 
'Port Start': Enter the WAN port number for the service, e.g. port 25 for e-
mail.
'Port End': Enter the WAN port number for the service, e.g. port 25 for e-
mail.
'Private Port Start': Enter the LAN port number for the service.   
The port number in the LAN may differ from that in the WAN, i.e. within your 
local network, you can assign port numbers that are different to conventional 
WAN numbers. In such cases, the router simply diverts the service to the 
relevant port.     
'Port Type': This is where you select the appropriate protocol, e.g. 'TCP'. 
'Host IP Address': This is where you enter the IP address of your local 
server, e.g. 192.168.0.249.
Confirm your entries by clicking on Add
DDNS
The Dynamic Domain Name System is an extension to DNS and controls the 
assignment of dynamic IP addresses for fixed host names (i.e. computer