Nortel 2526T Mode D'Emploi
76
Configuring Security using the CLI
Parameters and variables
Description
<username>
Specifies the SNMPv3 username for trap
destination; enter an alphanumeric string.
destination; enter an alphanumeric string.
no snmp-server host for the new-style table command
The
no snmp-server
for new-style table command deletes trap receivers
from the new-style table (SNMPv3 MIB). Any trap receiver that matches
the IP address and SNMP version is deleted. The syntax for the
the IP address and SNMP version is deleted. The syntax for the
no
snmp-server host
for new-style table command is:
no snmp-server host <host-ip> {v1|v2c|v3}
The
no snmp-server host
for the new-style table command is executed
in the Global Configuration command mode.
describes the parameters and variables for the
no
snmp-server
for the new-style table command.
Table 35
no snmp-server host for the new-style command parameters and variables
no snmp-server host for the new-style command parameters and variables
Parameters and
variables
variables
Description
<host-ip>
Enter the IP address of a trap destination host.
v1|v2c|v3
Specifies the trap receivers in the SNMPv3 MIBs.
default snmp-server host command
The
default snmp-server host
command restores the table
to defaults (that is, it clears the table). The syntax for the
default
snmp-server host
command is:
default snmp-server host
The
default snmp-server host
command is executed in the Global
Configuration command mode.
The
default snmp-server host
command has no parameters or
variables.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.