Nortel 15000 Guide De Référence

show bgp routes

308689-B Rev 00

23

 

The

command displays the BGP routing table. This command 

allows for the following command filters and arguments:

The output includes the following information:

<ip_address>

 

Displays BGP routes for the specified IP address.

<

ip_address/prefix

>

Displays BGP routes for IP addresses with the specified 
address mask.

Displays all attributes in addition to AS_PATH.

Displays routes damped by route flap damping.

Displays routes to and from the specified BGP peer ID.

Displays the ANNOUNCE pool.

Displays routes to and from the specified BGP peer -- 
local peer address/remote peer address.

Indicates the regular expression for AS pattern-matching.

Prefix/Length

IP address of the destination subnetwork and the length 
(in bits) of the IP address prefix.

Peer Address

IP address of the interface on the remote side of this BGP 
peer connection.

Next Hop Address

Address of the border router that should be used as the 
next hop for the destination network.

Org

Origin code used to calculate preference: IGP, EGP, 
Incomplete.

LocPref

Originating BGP speaker’s degree of preference for the 
advertised route (from -1 through 2,147,483,647). If this 
attribute has not been provided for this route, the value is 
-1.

B/U

Best/used indication. 

Best means that the route is the 

best BGP route to the destination; 

used means that the 

route is in the IP routing table.